• [System]: Americas frequencies support.
• [System]: Australia/Brazil frequencies support.
• [System]: Asia frequencies support.
• [System]: Korea frequencies support.
• [WEB interface]: Possibility to download received data.
• [WEB interface]: Possibility to send data.
• [WEB interface]: Possibility to download/upload the configuration.
• [WEB interface]: Possibility to download/upload a fleet of end-devices.
• [WEB interface]: Logs available.
• [WEB interface]: Possibility to delete all the fleet.
• [WEB interface]: New configuration menu available (network configuration, time configuration).
• [WEB interface]: Tested on Edge 12+ browser.
• [WEB interface]: Add antenna gain configuration.
• [WEB interface]: Host fields allow host and IP address.
• [USB key service]: Possibility to download received data.
• [USB key service]: Possibility to download/upload a configuration.
• [USB key service]: Possibility to download/upload a fleet of end-devices.
• [USB key service]: Logs available.
• [REMOTE HTTP service]: Possibility to receive data.
• [LOCAL FTP service]: Possibility to download received data.
• [LOCAL FTP service]: Possibility to send data.
• [LOCAL FTP service]: Possibility to download/upload the configuration.
• [LOCAL FTP service]: Possibility to download/upload a fleet of end-devices.
• [HTTP REST service]: Log management available.
• [LoRa]: “MonoSF” communication is working.

• [WEB interface]: Rearrange menu Configuration → Services.
• [WEB interface]: Host field allow host and IP address.
• [WEB interface]: After clicking on the factory reset button, a reboot button appears.

• [System]: Seen once: cannot create endpoint after a switch from region Australia 915-928 to AS 923MHz.
• [System] Status is always “UNKNOWN” in the fleet CSV file not managed.
• [System]: The SPN pass on Wi-Fi connection only if we unplug the ethernet wire.
• [WEB interface]: New OpenVPN configuration menu in present but the functionality is not validated.
• [WEB interface]: Messages errors display when adding 1000 motes.
• [WEB interface]: Some issues seen with version 11.608.15063.0 of IE 11+ browser.
• [WEB interface]: In logs, double spaces are not correctly displayed.
• [WEB interface]: APN, MCC and MNC should not be mandatory in the web interface.
• [WEB interface]: When the timezone is changed, a reboot is needed to apply the configuration in the log files.
• [REMOTE HTTP service]: Port change is not taken into account dynamically. A reboot is needed.
• [REMOTE FTP service]: Port change is not taken into account dynamically. A reboot is needed.
• [HTTP REST API service]: Possibility to set unavailable Timezone.
• [HTTP REST API service]: Response 204 to /application/spn/txdata for non-existing tx data id.
• [LoRa]: LBT not implemented.
• [LoRa]: Possible to set Tx power higher than 23 dBm in Korea Region.
• [LoRa]: Change of network_id do not reject frames of a mote that don't perform a new join.
• [LoRa]: FSK is not supported with data rate 7.
• [LoRa]: Class C Multi Downlink not available.
• [LoRa]: Some packet can be stuck in queue.
• [LoRa]: Class A TX packet stuck in queue when send before join procedure.
• [USB key service]: On iFemtoCell 923, there is no change in LEDs status once USB key is plugged in.

• No known issues on various hardware product versions.

• Compatible with Wirnet iFemtoCell firmware, from version 3.0.0.
• Compatible with Wirnet iFemtCcell/SPN firmware version 1.0.3.

For SPN new installation only (no SPN firmware installed):
liveburner_1.1.1-spn_klk-wifc.ipk md5: 24c192d89309744626be22cf6c994eb6

For SPN upgrade only (SPN firmware already installed):
keros_1.1.1-spn_klk-wifc.ipk md5:a1ddcf152ba843a11fc77fe91cbb2954