• [LoRa] Listen Before Talk (LBT) for Japan and Korea.
• [Multi-gateways]: SPN can now receive/send LoRa frames from/to other SPN iFemtoCell, Wirnet station and Wirnet iBTS.
• [SMS interface]: New interface to : get Rx data, add Tx data, manage configuration, manage end-devices, update interface activation, manage gateways, get status, update confguration file.
• [System]: Retrieve send Tx data.
• [System]: Delete end-device fleet.
• [System]: Add OpenVPN.
• [System]: Add halt command (with restrictions).
• [System]: Reset configuration .
• [LOCAL FTP interface]: License management.
• [WEB interface]:End-device parameters edition.
• [WEB interface]: Download Open-VPN configuration.
• [USB interface]: Add Tx data withUSB key command.

• [LOCAL FTP interface]: The status file names now contain a OK/KO status.
• [USB interface]: The status file names now contain a OK/KO status.
• [USB interface]: move XXXXXXXX_password file.
• [System]: Remove rx2_frequency and rx2_datarate parameters from configuration.
• [System]: Change Tx data field order.
• [System]: Serial number now with 8 digits.
• [system]: LED behavior.
• [System]: Update license file format.
• [System]: Shut down WiFi administration interface after 1 hour.

• [System]: Wirnet iFemtoCell SPN pass on WiFi connection only if we unplug the ethernet wire.
• [System]: Cannot declare an OTAA end-device starting with multiple 0 (e.g. 0000000000112233) if an ABP end-device has the same name (00112233).
• [System]: End-devices sequence numbers are reset if the end-devices are restarted.
• [System]: getOpenVPNConfiguration returns only “enable”.
• [System]: Halt on iFemtoCell SPN doesn't really stop the iFemtoCell. It reboots after a few seconds/minutes.
• [System]: Region configuration lost between version 1.1.1 and 2.0.0 for US gateways.
• [System]: Status is always “UNKNOWN” in the fleet.
• [System]: Cannot create end-device immediately after a switch from region Australia 915-928 to AS 923MHz.
• [System]: Received data are not correctly formatted (no zero padding).
• [System]: When switched off, the WiFi radio power is not truly powered off.
• [LoRa]: Change of network_id do not reject frames of a mote that don't perform a new join.
• [LoRa]: FSK is not supported with data rate 7.
• [LoRa]: If LBT feature is used, frames in SF9&SF10 will be rejected.
• [LoRa]: DR6 SF7-BW250 for RX2 data rate is not available for Asia and Japan Region.
• [LoRa]: MonoSF drift from radio x central frequency is reduce from 400kHz to 300kHz.
• [LoRa]: Possible to set Tx power higher than 23 dBm in Korea Region.
• [Remote HTTP]: The push URL cannot contain any question mark sign, has to end with a slash, and it always has a suffix appended to what the user has entered.
• [WEB interface]: When the timezone is changed, a reboot is needed to apply the configuration in the log files.
• [WEB interface]: Network parameters are lost when a network interface is turned off on WEB interface.
• [WEB interface]: Reset configuration is too slow, nothing happens before 30s - 60s.

• No known issues on various hardware product versions.

• Compatible with Wirnet iFemtocell firmware, from version 3.0.0..
• Compatible with Wirnet iFemtocell/SPN firmware version 1.0.3 and 1.1.1.

• Compatible with LoRaWAN Specification V1.0.2
• Compatible with LoRaWAN Regional Parameters V1.1

For SPN new installation only (no SPN firmware installed):
liveburner_2.0.3-spn_klk-wifc.ipk md5: e1bd24ba904baba5020d3d2f1a236950.

For SPN upgrade only (SPN firmware already installed):
keros_2.0.3-spn_klk-wifc.ipk md5:14ce5c413c0adaa826fe39872a749358

For SPN reinstallation and reset (SPN 2.0.3 firmware already installed):
liveburner_2.0.3-spn_klk-wifc.ipk.gpg md5:616c6befac9c53d7e35b87bfdb5cbd81