Introduction
Firmware management:
LoRa network management
Interfaces:
Gateway administration
Support and resources:
User Tools
Sidebar
wiki:webui:administration:network
This is an old revision of the document!
Table of Contents
Network interfaces
Wanesy SPN configuration is done via Ethernet, Wi-Fi or GSM.
When changing the Network configuration, make sure the configuration is correct, otherwise, you might have trouble connecting to the gateway.
If the connection to the gateway is lost, the gateway will have to be formatted, resulting in the loss of your data.
When connecting for the first time to the gateway, a DHCP server is mandatory to get an IP. Wanesy SPN does not have a default static IP address.
Gateway's URL
If the gateway is connected to a DNS server, then the web user interface can be accessed through the following address:
| Gateway model | Address |
|---|---|
| Wirnet iFemtoCell | http://klk-wifc-XXXXXX/ |
| Wirnet iStation | http://klk-wiis-XXXXXX/ |
| Wirnet iFemtoCell-evolution | http://klk-fevo-XXXXXX/ |
Where XXXXXX are the last 6 digits of board id. More information here.
If the gateway is not connected to a DNS server, then the web interface can be accessed through the gateway's IP address. If you forgot the IP address, you can retrieve it using the following methods.
Network monitoring
The current Wanesy SPN version is designed to work with only one interface at a time. Failover/handover mechanism is not fully available on the network interfaces. Choosing between Ethernet, GSM and Wi-Fi is recommended.
Failover/handover mechanism and network monitoring should be available within the next releases.
GSM configuration
Wirnet iStation and iFemtoCell-evolution have a native GSM support. Wirnet iFemtoCell does not have native GSM support but a GSM dongle can be connected to gateway USB port.
The list of compatible dongles for iFemtoCell is available here (use the column v4.0.4)
To access the GSM configuration:
- Connect the dongle to the gateway
- Go to page
Administration ⇒ Network ⇒ GSMand refresh until GSM page is no more grayed out (restart gateway if refresh does not work after a while)
A list of Mobile Network Code and Mobile Country Code can be found here.
wiki/webui/administration/network.1584110452.txt.gz · Last modified: 2020/03/13 15:40 by ghi
