This firmware has been developed and tested only for Wirnet iFemtoCell-evolution gateway. It MUST NOT be used on other gateways.
This firmware version is deleted to avoid upgrade issue with other gateway architectures than Wirnet iFemtoCell-evolution.
Please use the KerOS firmware v4.2.2 instead.
Changes from v4.1.6
New features
Support for Wirnet™ iFemtoCell-evolution.
Add BNM support for iStation and iFemtoCell-evolution.
Add get_logs tool to simplify troubleshooting
Evolutions
Few improvement around gsmdiag (show status file by default).
Re-index eMMC device and always set it to /dev/mmcblk0 (instead xx0 for iBTS and xx1 for iFemtoCell).
Restrictions
SMS Feature
SMS manager command doesn't work on sierra_0 on Dual WAN iBTS.
SMS is not working with dongle E3372s with some SIMs.
System
Sometimes, BNM measurement is not accurate at +/-2dB.
Update
IPK update status is in error for all packages if only one package installation failed.
Network
Network monitoring does not restart a service if a DNS problem occurs.
WiFi (iFemtocell only)
Impossible to connect with an Android system to Access Point WiFi of the gateway.
No fallback on WiFi.
Some instabilities with the WiFi interfaces.
Firmware
Hardware compatibility
Only compatible with Wirnet iFemtoCell-evolution gateways (CVaa, CWaa, and CXaa).
Delivery
The firmware is released in one format: Liveburner.
Liveburner : Reset the Firmware of the product
Update stock restore version
Reset the default password on your gateway.
Erase the whole partition to reinstall the firmware.