KerOS firmware v5.11.0 (February 2024)

Changes from v5.10.1

Fix LoRa demodulator (SX130x) counter overflow and time synchronization
Fix application of LBT and beaconing configuration by LNS in Basic Station packet forwarder for Wirnet iFemtoCells and iStations
Fix beaconing activation by LNS in Basic Station packet forwarder

Keep the default generic operator configuration for cellular Wirnet iZepto-cell only
Update the default APN list to reduce the need to configure the cellular backhaul
Detect when a SIM is present but not operational
Select the best active antenna to transmit downlinks depending on radio performances in a 2x8channels Wirnet iBTS Compact configuration

IPSec is not yet supported
Some issues with the Wi-Fi interface (instabilities, no fallback…) on Wirnet iFemtoCell
When upgrading from KerOS firmware 4.x, all trustzone secrets are lost
When upgrading from KerOS FW 4.3.3, a hardware reset is necessary for FW 5.x burner to correctly detect USB
Update status for an update from KerOS FW 5.1.x, FW 5.2.x or FW 5.3.x is in error, but the update is working fine
No more support of GSM dongles (please contact Kerlink if you plan to use one)
When iZepto-E is powered by a computer, it cannot benefit from the connection of a gateway in router mode
The activation/deactivation of the GSM from the local web interface takes some time to execute, so previous activation status remains displayed for a while. A page refresh after a delay of 15-20s after the action shows the right status

Compatible with Wirnet™ i-series gateways (Wirnet iBTS, Wirnet iFemtoCell, Wirnet iStation, Wirnet iFemtoCell-evolution, Wirnet iZeptoCell Ethernet, Wirnet iZeptoCell Cellular).

Compatible with Wirnet™ i-series gateways secured with Kerlink Production fuses or without any fuses flashed.
Regular update (keros.ipk) is incompatible with firmware older than v5.x

To upgrade the system from KerOS version 4.3.3 to KerOS version 5.x the use of a liveburner is MANDATORY. Two possibilities are available:
Upgrade with a custom liveburner. It allows to keep some elements like gateway configuration. To use a custom liveburner, please refer to the dedicated page: Major version upgrade with a custom liveburner.
Upgrade with a regular liveburner (erasing the whole partition to reinstall the firmware)

The firmware is released in two formats: KerOS and Liveburner.

KerOS : Update the Firmware
To update the firmware from v5.x, the regular update procedure can be used. See system upgrade page.

Liveburner : Reset the Firmware of the product

KerOS IPK 5.11.0:keros_5.11.0_klkgw-signed.ipk md5: 2262b765404a40ddd5424ccb3dd0a0c5
Liveburner IPK 5.11.0: liveburner_5.11.0_klkgw-signed.ipk md5: 57718de9246e3ffb10d0dfe2f4880dfb
Liveburner IPK 4.3.3-2: liveburner_4.3.3-2_klkgw-signed.ipk md5: 12CFEFB8D4630A34AA90C77E6C73A193
Custom liveburner IPK 5.11.0: custom-liveburner_5.11.0_klkgw-signed.ipk md5: 292a214e7cdac5bea7284ac81e1aa13c
Update liveburner package: update_liveburner_package-v5.5.4.tar.gz md5: b34113c633b829de2422e297ccdb1f53
64-bit toolchain: poky-glibc-x86_64-keros-toolchain-klkgw-5.10.1.sh md5: d62f2552771d7b3964629480aa885fdf