Home
Setup
Support and resources
Sidebar
wiki:firmware:release_1.9.0
Table of Contents
Wanesy Wave firmware v1.9.0 (May 2021)
Changes from previous version
New features
- No new feature in this release
Evolutions
- Asset tracking: improve BLE scan robustness
- Maximize Wi-Fi STM32 FW update success
- Earlier initialization of critical GPIOs
Restrictions
- Firmware upgrade procedure must respect specific order described in section below
Firmware
Compatibility
Hardware
This release is compatible with the following Wanesy Wave revision:
- Wanest Wave 868:
- Fully compatible with Wanesy Wave Board ID xxxDAcxxxxxx, xxxDAdxxxxxx, xxxDAexxxxxx.
- Wanesy Wave 915:
- Fully compatible with Wanesy Wave Board ID xxxDBcxxxxxx, xxxDBdxxxxxx, xxxDBexxxxxx, xxxDBfxxxxxx .
Software
- STM32 MCU firmware Ver. 1.9.0
- ESP32 MCU firmware Ver. 1.9.0
Delivery
The firmware is released in two files: STM32 MCU firmware binary 'kbin' file and ESP32 MCU firmware binary file.
STM32 MCU :
To update the firmware, follow instruction on the Firmware update section of the Setup page: click here.
ESP32 MCU:
To update the firmware, follow instruction on the Firmware update section of the Setup page: click here.
Download
Wi-Fi: firmware update
Firmware update procedure must respect the specific order described below (update STM32 first):
| steps | STM32 version | ESP32 version | SSID | Actions |
|---|---|---|---|---|
| #1 | 1.8.0 | 1.8.0 | wave_xxxx | Place product upright away from wall or table |
| Upload STM32 V1.9 image | ||||
| Wait until green LED is back ON (ie. no longer blinking) | ||||
| #2 | 1.9.0 | 1.8.0 | wave_xxxx | Verify STM32 version in device_info.txt file |
| Upload ESP32 V1.9 image | ||||
| #3 | 1.9.0 | 1.9.0 | wave_xxxx | Verify ESP32 version in esp32_version.txt file |
- Wanesy Wave 868: wifiupdate_wanesywave_eu868_v1.9.0_20210503_revs_cde.zip
- STM32 file:
stm32_wanesywave_EU868_v1.9.0_DAcde.kbin(md5: 9e6de37facb753162057d201e870e058). - ESP32 file:
esp32_firmware_v1.9.0.bin(md5: fdff27fec5444d500745e962057efd46).
- Wanesy Wave 915: wifiupdate_wanesywave_us915_v1.9.0_20210503_revs_cdef.zip
- STM32 file:
stm32_wanesywave_US915_v1.9.0_DBcdef.kbin(md5: 35125aa8baf5555ed3e61e5be3882b22). - ESP32 file:
esp32_firmware_v1.9.0.bin(md5: fdff27fec5444d500745e962057efd46).
Wi-Fi: region configuration
- Wanesy Wave 868: region_conf_wifiupdate_wanesywave_868_v1.8.0_20210421_revs_cde.zip
- cmd_region_EU868.txt
- cmd_region_IN865.txt
- Wanesy Wave 915: region_conf_wifiupdate_wanesywave_915_v1.8.0_20210421_revs_cdef.zip
- cmd_region_US915.txt
- cmd_region_AU915.txt
- cmd_region_AS923.txt
History
- 1.9.0 (May 2021):
- Improve BLE scan robustness
- Maximize WiFi STM32 FW update success
- Earlier initialization of critical GPIOs
- 1.8.0 (February 2021):
- Support of multiple regional parameters.
- Use unconfirmed TX on LoRaWAN services.
- Wi-Fi update over HTTP.
- Access Point SSID personal identification based on EUI.
- Limit duration of Wi-Fi access point availability.
- 1.7.0 (June 2020):
- Initial release for Wanesy Wave.
wiki/firmware/release_1.9.0.txt · Last modified: 2022/08/30 14:55 by mbi
