| Package | md5sum |
|---|---|
| fwupgrade_wirmav2_wirnet_v3.6_wmc_v3.1.8.tar.gz | 35151a963d836de1b7d7c1605b16589e |
The content of this package is listed below:
| Component | Version |
|---|---|
| keros | 3.6 |
| bscc | 3.1.6 |
| lorasnmp | 3.1.4 |
| lorad | 1.1.5-1 |
| lorafwd | 1.1.3-2 |
There are 3 ways to update your gateway's software:
The update procedure uses 1 USB stick will upgrade the firmware to KerOS 3.6 and will install all other packages with the required software release: BSCC, SNMP, Common Packet Forwarder (CPF) and OpenVPN packages (see the version numbers above).
| description | file | md5sum |
|---|---|---|
| USB stick | AUTO_DEPLOY_WISTA_3.1.8_USB_STICK.tar.gz | 5a0a3a0d4e397d2ca88e4392204e765e |
1. Deflate twice the tar.gz file on the USB stick in the root directory
2. Copy files located in the folder AUTO_DEPLOY_WISTA_3.1.8_USB_STICK to the root directory
3. Add your OpenVPN secrets packages in the /vpn_packages/ folder before plugging the stick into the system (if necessary ask for packages to the Kerlink support team)
4. Plug the USB stick in the gateway USB slot
5. Wait the end of the update
Refer to the specific wikis to get more details (ex led management) about software update via USB sticks:
Wirnet Station: http://wikikerlink.fr/lora-station/doku.php?id=wiki:updates#usb_update_recommended
The USB tree should contains the following files/folders:
/
├── autorun_klk.sh # executed by Wirnet Stations when plugging the USB stick
└── tmp
| ├── mnt
| | └── fsuser-1
| | └── dota
| | └── mnt
| | └── fsuser-1
| | └── dota
| | ├── dota_v3.1.6_bscc.tar.gz # BSCC component
| | ├── dota_v3.1.4_snmp.tar.gz # SNMP component
| | ├── dota_cpf_1.1.8-2.tar.gz # CPF component
| | └── custo_knetd-4.12.tar.gz # KNETD component
| ├── initramfs.cpio.gz.ubot # initramfs linux root filesystem
| ├── script_uboot.img # U-Boot bootloader
| └── uImage # linux kernel
├── _produsb.sh # executed by Wirnet Stations after rebooting (will flash the software)
├── README # This file
└── vpn_packages # WMC OpenVPN packages folder
├── custo_openvpn_config.tar.gz # OpenVPN config package for all Wirnet Stations
├── custo_openvpn_secrets_<serial-1>*.tar.gz # OpenVPN secret package for one Wirnet Station
├── custo_openvpn_secrets_<serial-2>*.tar.gz # OpenVPN secret package for one Wirnet Station
├── custo_openvpn_secrets_<serial-3>*.tar.gz # OpenVPN secret package for one Wirnet Station
├── custo_openvpn_secrets_<serial-4>*.tar.gz # another Wirnet Station
├── custo_openvpn_secrets_<serial-5>*.tar.gz # ...
└── custo_openvpn_secrets_<serial-6>*.tar.gz # ...
Main changes regard to the 3.1.6 embedded software are listed below:
Please note that, if gateways use public IP, it also makes your gateway accessible from Internet on open SSH or HTTP ports (protected by passwords). Kerlink so recommends changing passwords as described in Connection, login and credentials