WMC v3.x wiki
Introduction
Quick Start
System Management
Network Management
SNMP
Push
LoRa features
GMS API
Troubleshooting
Gateway software resources
WMC 3.2:
Server software resources
WMC 3.2:
FAQ
WMC 3.x:
WMC 3.0:
WMC 3.1:
>= WMC 3.2:
>= WMC 3.1:
User Tools
Sidebar
wiki:wiki3:faq_gw_first_install_3.2
This is an old revision of the document!
Table of Contents
FAQ - Gateway Software Installation for WMC >= 3.2
This procedure is the First Install procedure.
It must be performed from scratch (only FW is available - the gateway is not connected to the WMC)
How to install 4.x embedded software for my gateway?
Follow this procedure or use the magic link:
- Ask for a new OpenVPN packages to the support@kerlink.fr team and give the serial number of your gateway
- Install the gateway software by following the procedure described here: Wirnet i-series software release 4.3.3
- Install the OpenVPN packages on your gateway (as any other package, see the link for software upgrade below)
- Enable the embedded WMC application (click here to see how to use klk_apps_config)
- Wait a short time and check that the gateway is connected to the WMC 3.x
The software update procedure is defined above:
Wirnet Product Line (iBTS, iFemtoCell, iStation):http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates
The magic link can also be used for a first install process. Follow this link to perform this.
How to install 3.x embedded software for my gateway? (before FW 4.3.3)
Follow this procedure or use the magic link:
- Ask for a new OpenVPN packages to the support@kerlink.fr team and give the serial number of your gateway
- Install the OpenVPN packages on your gateway (as any other package, see the link for software upgrade below)
- Install the gateway software by following the procedure described here: FAQ - Gateway Upgrade for WMC 3.x
- Wait a short time and check that the gateway is connected to the WMC 3.x
The software update procedure is defined above:
Wirnet Product Line (iBTS, iFemtoCell, iStation):http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates
The magic link can also be used for a first install process. Follow this link to perform this.
wiki/wiki3/faq_gw_first_install_3.2.1600789733.txt.gz · Last modified: 2020/09/22 17:48 by ghi
