WMC v3.x wiki
Introduction
Quick Start
System Management
Network Management
SNMP
Push
LoRa features
GMS API
Troubleshooting
Gateway software resources
WMC 3.2:
Server software resources
WMC 3.2:
FAQ
WMC 3.x:
WMC 3.0:
WMC 3.1:
>= WMC 3.2:
>= WMC 3.1:
User Tools
Sidebar
wiki:wiki3:faq_gw_upgrade_3.2
Table of Contents
FAQ - Gateway Software Upgrade for WMC >= 3.2
The Magic link can also be used to upgrade your KerOS products (Wirnet iBTS, Wirnet iFemtoCell, Wirnet iStation).
Follow this Magic Link to perform this.
The gateway is considered connected to the WMC using embedded software >= 3.1
The Wirnet Station is not supported by this software release.
CAUTION with gateways that are statically IP assigned.
You may loose the WMC connection! Follow the procedure described below
You may loose the WMC connection! Follow the procedure described below
Embedded gateway software version 4.3.3
How to upgrade my gateway?
This process must be followed if the gateway is already connected to WMC with gateway firmware version 3.2 or 3.3.
Download the KerOS 4.3.3 to update your gateway from the :
- Wirnet i-series software release 4.3.3 page to upgrade your gateway with the last embedded software
Then apply the software update procedure defined above:
The gateway can be upgraded:
- By applying a Magic Link
- With a Drag and Drop of the package in the WMC dashboard
- Directly on the gateway by SSH: http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates#software_updates
Embedded gateway software version 3.2 and 3.3 (embedded version before 4.3.3)
How to upgrade my gateway that is ETHERNET (DHCP IP assigned), GSM or WIFI?
Download the last megapackage 3.x to update your gateway from the :
- 3.2 Gateway Software Releases page to upgrade your gateway with the last 3.2 embedded software
- 3.3 Gateway Software Releases page to upgrade your gateway with the last 3.3 embedded software
For a software upgrade on kerOS products (Wirnet iBTS and Wirnet iFemtocell) via a local access (SSH, USB), the megapackage need to be deflated twice in order to get ipk packages.
Then apply the software update procedure defined above:
If you proceed software upgrade via the dashboard (Drag and Drop or Workflow feature), you don't need to deflate the megapackage.
Wirnet KerOS Products: http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates#software_updates
How to upgrade my gateway that is static-IP assigned (ETHERNET)?
- First, if your software release is a 3.1 embedded software release, rebuild the
lan.configfile (copy lan.config.keros3 if exists) and save it into the/etc/network/connmandirectory. - Wait for reconnection to the WMC
- Download the last megapackage 3.x to update your gateway from the:
- 3.2 Gateway Software Releases page to upgrade your gateway with the last 3.2 embedded software
- 3.3 Gateway Software Releases page to upgrade your gateway with the last 3.3 embedded software
Then apply the software update procedure defined above:
Wirnet KerOS Products: http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates#software_updates
wiki/wiki3/faq_gw_upgrade_3.2.txt · Last modified: 2020/09/22 17:49 by ghi
