WMC v3.x wiki
Introduction
Quick Start
System Management
Network Management
SNMP
Push
LoRa features
GMS API
Troubleshooting
Gateway software resources
WMC 3.2:
Server software resources
WMC 3.2:
FAQ
WMC 3.x:
WMC 3.0:
WMC 3.1:
>= WMC 3.2:
>= WMC 3.1:
User Tools
Sidebar
wiki:wiki3:faq_staticip_3.x
This is an old revision of the document!
Table of Contents
FAQ - Static IP configuration
How to configure static IP assignment for my gateway ?
The static IP assignment must be done for a gateway from “scratch” (only FW is available).
Do not disable DHCP from the WMC dahsboard.
This can imply a connection loss to the WMC.
Do not disable DHCP from the WMC dahsboard.
This can imply a connection loss to the WMC.
Changing the network configuration through the WMC dashboard is not recommended. Doing this through the local configuration is the good way since DNS configuration cannot be done through the dashboard.
Refer to the specific Wiki to setup static IP for your gateway:
Wirnet Station: http://wikikerlink.fr/lora-station/doku.php?id=wiki:faq#how_to_configure_static_ip_address
Wirnet iBTS: http://wikikerlink.fr/wirnet-ibts/doku.php?id=wiki:backhaul_3.3.3#ethernet_configuration
Wirnet iFemtoCell: http://wikikerlink.fr/wirnet-ifemtocell/doku.php?id=wirnet-ifemtocell:network_3.4.4#ethernet_configuration
wiki/wiki3/faq_staticip_3.x.1558099399.txt.gz · Last modified: 2019/05/17 15:23 by tda
