WMC v3.x wiki
Introduction
Quick Start
System Management
Network Management
SNMP
Push
LoRa features
GMS API
Troubleshooting
Gateway software resources
WMC 3.2:
Server software resources
WMC 3.2:
FAQ
WMC 3.x:
WMC 3.0:
WMC 3.1:
>= WMC 3.2:
>= WMC 3.1:
User Tools
Sidebar
wiki:wiki3:network_configuration
Table of Contents
Network configuration
To setup connectivity between the Gateway and the WMC, following network configuration is required:
WMC Server
For the WMC Server platform, the following ports must be opened:
| Port | Protocol | Direction |
|---|---|---|
| 80 TCP | HTTP | in-out |
| 443 TCP | HTTPS | in-out |
| 1194 UDP | OpenVPN | in |
Server shall be ICMP reachabled from Internet for ping:
| Protocol | Direction |
|---|---|
| ICMP | in-out |
Gateways
For the gateways, the following ports must be opened:
| Port | Protocol | Direction |
|---|---|---|
| 1194 UDP | OpenVPN | out |
| 53 UDP | DNS | out |
| 123 UDP | NTP | out |
The gateways shall issue ICMP commands through Internet for ping:
| Protocol | Direction |
|---|---|
| ICMP | out |
When connected to the Wanesy Management Center VPN, the IP address assigned to the gateway is in the 10.8.0.0/16 subnet.
The gateway LAN subnet should not overlap with this subnet.
172.17.0.1 is the IP reserved for the LNS. The local network of the gateway should not contain any device with this IP. It will create a conflict and won't work.
wiki/wiki3/network_configuration.txt · Last modified: 2023/03/30 16:08 by cgu
