WMC v3.x wiki
Introduction
Quick Start
System Management
Network Management
SNMP
Push
LoRa features
GMS API
Troubleshooting
Gateway software resources
WMC 3.2:
Server software resources
WMC 3.2:
FAQ
WMC 3.x:
WMC 3.0:
WMC 3.1:
>= WMC 3.2:
>= WMC 3.1:
User Tools
Sidebar
wiki:wiki3:network_configuration
This is an old revision of the document!
Table of Contents
Network configuration
To setup connectivity between the Gateway and the WMC, following network configuration is required:
WMC Server
For the WMC Server platform, the following ports must be opened:
| Port | Protocol | Direction |
|---|---|---|
| 80 TCP | HTTP | in-out |
| 443 TCP | HTTPS | in-out |
| 1194 UDP | OpenVPN | in |
Server shall be ICMP reachabled from Internet for ping:
| Protocol | Direction |
|---|---|
| ICMP | in-out |
Gateways
For the gateways, the following ports must be opened:
| Port | Protocol | Direction |
|---|---|---|
| 1194 UDP | OpenVPN | out |
| 53 UDP | DNS | out |
| 123 UDP | NTP | out |
The gateways shall issue ICMP commands through Internet for ping:
| Protocol | Direction |
|---|---|
| ICMP | out |
When connected to the Wanesy Management Center VPN, the IP address assigned to the gateway is in the 10.8.0.0/16 subnet.
The gateway LAN subnet should not overlap with this subnet.
wiki/wiki3/network_configuration.1621864993.txt.gz · Last modified: 2021/05/24 16:03 by hch
