WMC v3.x wiki
Introduction
Quick Start
System Management
Network Management
SNMP
Push
LoRa features
GMS API
Troubleshooting
Gateway software resources
WMC 3.2:
Server software resources
WMC 3.2:
FAQ
WMC 3.x:
WMC 3.0:
WMC 3.1:
>= WMC 3.2:
>= WMC 3.1:
User Tools
Sidebar
wiki:wiki3:packet_forwarder
Table of Contents
Packet Forwarder Configuration
The configuration of the packet forwarder is usually done through the web interface.
How to manually edit the packet forwarder configuration
If the configuration has to be changed manually from the gateway, in order to have the WMC show the updated data, the following steps have to be performed:
- Edit the configuration files manually (SSH or debug probe).
- Restart the SNMP daemon.
Edit the configuration files
Instructions:
- For Wirnet Station.
- For Wirnet iBTS.
- For Wirnet iFemtoCell.
Restart the SNMP daemon
- For KerOS (Wirnet iBTS, Wirnet iFemtoCell):
/user/snmp/snmpd.init restart
- For Wirnet Station:
kmstool appstop snmpd kmstool appstart snmpd
wiki/wiki3/packet_forwarder.txt · Last modified: 2019/03/21 17:36 by bdu
