Setups
General information
Wirnet™ iBTS information
Wirnet™ iFemtoCell information
Wirnet™ iFemtoCell-evolution information
Wirnet™ iStation information
System management
Network management
LoRa Features
KerOS customization
Support and resources
Sidebar
resources:resources_halv2_v5.1.0klk5
This is an old revision of the document!
Table of Contents
Semtech HALv2 v5.1.0-klk5 (June 2018)
Changelog
klk_spectral_scantool: Few corrections made.send_pkt: Do not exit without explicit command.- utils tools: Add a local configuration file.
- utils tools: Correct json format in config.json file.
- utils tools: Add
loraloc_infotool. - utils tools: Add
rx_test.shtool. - Correction on TX acknowledge feature.
- Compilation: Rename ipk target to fpga.
- Compilation: Rename util target to utils.
Restrictions
send_pkt: Sometimes, the packets are not retransmitted when using an attenuation.- Check temperature at startup is wrong.
- If used in conjunction with a KerOS firmware older than v3.4 and a system restoration, some files may be lost. Indeed, when restoring the installed packages, if the firmware is restored after the packet forwarder, some of the files may be replaced by the firmware restoration. Workaround: Reinstall the packet forwarder and HAL packages after a system restoration.
klk_spectral_scan: No timeout when scanning beyond band capacities.
Compatibility
HAL v5.1.0 source code and tools are compatible only with FPGA firmware v61 and Wirnet™ iBTS KerOS firmware v3.x.
To know your FPGA software version consult the FAQ.
To upgrade your fpga version use the FPGA updater package (v61).
Download
libloragw2-5.1.0-klk5.tar.gz (MD5: 6367d12c167e6e4c0814319e1f09fb52)
resources/resources_halv2_v5.1.0klk5.1534255644.txt.gz · Last modified: 2019/01/17 10:01 (external edit)
