Setups
General information
Wirnet™ iBTS information
Wirnet™ iFemtoCell information
Wirnet™ iFemtoCell-evolution information
Wirnet™ iStation information
System management
Network management
LoRa Features
KerOS customization
Support and resources
Setups
General information
Wirnet™ iBTS information
Wirnet™ iFemtoCell information
Wirnet™ iFemtoCell-evolution information
Wirnet™ iStation information
System management
Network management
LoRa Features
KerOS customization
Support and resources
This is an old revision of the document!
Wirnet iBTS Installation and maintenance: Installation and maintenance manual v2.0.
 à revoir avec CPF
 à revoir avec CPF
| KerOS firmware version | Semtech Packet Forwarder (SPF) | Common Packet Forwarder (CPF) | 
|---|---|---|
| Since 4.x.x | Not compatible | Compatible | 
| 3.x.x and lower | Compatible | Not compatible | 
Before KerOS firmware release v4.x.x, Kerlink provides pre-compiled Semtech packet forwarder (SPF), but since KerOS firmware release v4.x.x, only the pre-compiled Common packet forwarder (CPF) is provided, pre-compiled SPF are no more compatible.
| KerOS firmware version | Packet Forwarder version | FPGA version | HAL version | |
|---|---|---|---|---|
| Wirnet iBTS | 4.0.2 | cpf? | ? | ? | 
| Wirnet iBTS | 3.x.x | spf2_5.1.0-klkx | 61 | 5.1.0-klkx | 
| Wirnet iBTS | 3.x.x | spf2_4.0.0-klk7 | 58 | 4.0.1-klk3 | 
For Wirnet iBTS with firmware release v3.x.x (before v4.0.2), please refer to old Wirnet™ iBTS wiki.
Here is the list of downloadable KerOS firmware releases and their major updates compared to previous versions. To get information on older firmware consult the Firmware release history page.
Software releases from this page are not guaranteed to work with Wanesy Management Center.
Kerlink provides the cross-toolchain, libraries and headers necessary to the compilation of an application. For more information consult the Toolchain page.
The packet forwarder is a program running on the host of a Lora gateway that forwards RF packets received by the gateway to a server through an IP/UDP link and emits RF packets that are sent by the server. For more information consult the Kerlink Common Packet forwarder page.
Kerlink provides .ipk packages to install operators approved by cellular firmware.
These packages are not compatible with dual WAN modems.
| Modem | company | IPK name | firmware | configuration | 
|---|---|---|---|---|
| MC7354 | Generic | wanmodemupgrade-mc7354-generic_1.1_all.ipk 	 md5: d9284bf8c88bdcef008ef0daf2a47fde | SWI9X15C_05.05.58.00 | 005.025_002 | 
| MC7354 | ATT | wanmodemupgrade-mc7354-att_1.1_all.ipk 	 md5: e098a9481f420bf4c4e05a247748824e | SWI9X15C_05.05.58.00 | 005.026_000 | 
| MC7354 | Bell | wanmodemupgrade-mc7354-bell_1.1_all.ipk md5: 357e510eceac9f7fafd9d7643322c658 | SWI9X15C_05.05.58.00 | 005.024_000 | 
| MC7354 | Rogers | wanmodemupgrade-mc7354-rogers_1.1_all.ipk md5: 00083dfde61c5916eac2517f436ba03b | SWI9X15C_05.05.58.00 | 005.022_000 | 
| MC7354 | Telus | wanmodemupgrade-mc7354-telus_1.1_all.ipk md5: f53badb852c1eaab07855ab644407d73 | SWI9X15C_05.05.58.00 | 005.023_000 | 
| MC7354 | Verizon | wanmodemupgrade-mc7354-verizon_1.1_all.ipk md5: 618ba29ff25d252e8e7c83de79515a50 | SWI9X15C_05.05.58.01 | 005.029_001 |