Setups
General information
Wirnet™ iBTS information
Wirnet™ iFemtoCell information
Wirnet™ iFemtoCell-evolution information
Wirnet™ iStation information
System management
Network management
LoRa Features
KerOS customization
Support and resources
Sidebar
wiki:firmware:release_4.0.2_ibts
This is an old revision of the document!
Table of Contents
Wirnet iBTS KerOS firmware v4.0.2 (March 2018)
Changes from v3.4.5
New features
- Writable File system.
- Add web interface.
- Add SMS management.
- Add KerOS REST API access.
- New backup management system.
- New package management system.
Evolutions
- Kernel updated to 4.14.9.
- Global package update.
- Discovery performance and stability improved.
CONFIG_IP_MULTIPLE_TABLESis now present on KerOS 4.0.x.- IPSec connection with basic PSK authenticated configuration and without ProvenCore works on keros 4.0.x.
- IPTABLES logging added in
/var/log/messages, also visible on the console. - Bootcount in U-boot and in
/tmp/board_info.jsonon KerOS 4.0.x.
Restrictions
- Configuration
- The result returned for the field
rpmb_statusin file/tmp/boar_info.jsonis not correct. This field must not be taken into account in firmware version 4.X. - BNM frequency configuration files depending on the board (bnm-868.conf, bnm-923.conf, bnm-915.conf) are not kept by default when upgrading the gateway.
- Security
- Provenrun
rpmb-statusis not working on kernel 4.14.
- SMS Feature
- SMS command
_operatordoesn't receive a response when it's OK. - SMS manager command doesn't work on sierra_0 on Dual WAN iBTS.
- System
- Possible Kernel errors when using fixnetwork.
- Default behavior of the
store-configtool is to save the file/user/loginthat is not present in KerOS 4.x firmware.
- Update
- IPK update status is in error for all packages if only one package installation failed.
- Web Interface
- System manager error in the “Administration” menu when trying to configure a static IP whereas cellular backhaul is already defined as default connection (
main.conf). - After a time modification more than 12h (token validity), the board does not reboot after pressing the “Reboot gateway” button.
- When editing a cellular operator that is not used, it returns an error.
- Sometimes GSM status stays green although the cellular is disconnected.
Firmware
Compatibility
Hardware
- Fully compatible with Wirnet iBTS ATc03 architecture and above.
- Partially compatible with Wirnet iBTS ATa01 and ATb02 architecture (issue with reset Button).
Software
- Compatible with Wirnet iBTS products with Kerlink Production fuses or without any fuses flashed.
- Simple update (
keros.ipk) incompatible with firmware older than v4.x → Use ofliveburnerpackage is MANDATORY. - Update from v1.x or v2.x to v4.x is not compatible, it is MANDATORY that the firmware is at least in firmware v3.x.
- ProvenCore firmware and utilities (uploader) changed as of v3.1.0, and files to be uploaded to the ProvenCore have to be processed by
pnrcipherbefore uploading.
Due to multiple KerOS changes, direct update in v4.x IS NOT COMPATIBLE from firmware v2.x & v1.x.
It is required first to update the gateway in v3.x to be able to update it after with the
For the update in v3.x, please refer to the Wirnet iBTS wiki, firmware v3.4.5 page.
It is required first to update the gateway in v3.x to be able to update it after with the
liveburner package v4.x.For the update in v3.x, please refer to the Wirnet iBTS wiki, firmware v3.4.5 page.
Delivery
The firmware is released only in one format: Liveburner.
To update the firmware from v3.x to v4.x, it is mandatory to use the liveburner package.
See system upgrade page.
Download
- Liveburner IPK: liveburner_4.0.2_klk-lpbs-signed.ipk md5:
291d0fea051ba6cbe53e5c5c00307c0f
- Hotfix(s) only applicable for this firmware version:
- hotfix-enable-tai_1.0.0_klk_lpbs.ipk; md5
b0939dec9bd239e09b46dd617e26e105: This hotfix is used to enable the International Atomic Time, so LoRa class B can be used.
wiki/firmware/release_4.0.2_ibts.1569404412.txt.gz · Last modified: 2019/09/25 11:40 by ghi
