Setups
General information
Wirnet™ iBTS information
Wirnet™ iFemtoCell information
Wirnet™ iFemtoCell-evolution information
Wirnet™ iStation information
System management
Network management
LoRa Features
KerOS customization
Support and resources
Sidebar
wiki:firmware:release_5.10
Table of Contents
KerOS firmware v5.10.1 (October 2023)
Changes from v5.9.0
Release corrections
- Fix missing channels in LoRaWAN radio configuration
- Enable LoRaWAN radio configuration by Basic Station on iZepto-cell products
- Monitor temperature range at LoRa service start
- Reduce RAM consumption caused by internal databases
Evolutions
- Add the possibility to use HTTPS for the Web User Interface
- Support of EC25J auto-Fuota
Restrictions
- IPSec is not yet supported
- Some issues with the Wi-Fi interface (instabilities, no fallback…) on Wirnet iFemtoCell
- When upgrading from KerOS firmware 4.x, all trustzone secrets are lost
- When upgrading from KerOS FW 4.3.3, a hardware reset is necessary for FW 5.x burner to correctly detect USB
- Update status for an update from KerOS FW 5.1.x, FW 5.2.x or FW 5.3.x is in error, but the update is working fine
- No more support of GSM dongles (please contact Kerlink if you plan to use one)
- When iZepto-E is powered by a computer, it cannot benefit from the connection of a gateway in router mode
- The activation/deactivation of the GSM from the local web interface takes some time to execute, so previous activation status remains displayed for a while. A page refresh after a delay of 15-20s after the action shows the right status
Firmware
Compatibility
- Compatible with Wirnet™ i-series gateways (Wirnet iBTS, Wirnet iFemtoCell, Wirnet iStation, Wirnet iFemtoCell-evolution, Wirnet iZeptoCell Ethernet, Wirnet iZeptoCell Cellular).
Software
- Compatible with Wirnet™ i-series gateways secured with Kerlink Production fuses or without any fuses flashed.
- Regular update (
keros.ipk) is incompatible with firmware older than v5.x
- To upgrade the system from KerOS version 4.3.3 to KerOS version 5.x the use of a liveburner is MANDATORY. Two possibilities are available:
- Upgrade with a custom liveburner. It allows to keep some elements like gateway configuration. To use a custom liveburner, please refer to the dedicated page: Major version upgrade with a custom liveburner.
- Upgrade with a regular liveburner (erasing the whole partition to reinstall the firmware)
Delivery
The firmware is released in two formats: KerOS and Liveburner.
KerOS : Update the Firmware
To update the firmware from v5.x, the regular update procedure can be used.
See system upgrade page.
Liveburner : Reset the Firmware of the product
- Update stock version with FW 5.10.1.
- Reset the default password on your gateway.
- Erase the whole partition to reinstall the firmware.
Download
- KerOS IPK 5.10.1:keros_5.10.1_klkgw-signed.ipk md5:
ba091bec29da89d2d238184eb983e5ed - Liveburner IPK 5.10.1: liveburner_5.10.1_klkgw-signed.ipk md5:
e4d58a7d34594647c59a3f45e5b1afcb - Liveburner IPK 4.3.3-2: liveburner_4.3.3-2_klkgw-signed.ipk md5:
12CFEFB8D4630A34AA90C77E6C73A193 - Custom liveburner IPK 5.10.1: custom-liveburner_5.10.1_klkgw-signed.ipk md5:
8f035e26a0e5c227f3f3ed02e4b0f946 - Update liveburner package: update_liveburner_package-v5.5.4.tar.gz md5:
b34113c633b829de2422e297ccdb1f53 - 64-bit toolchain: poky-glibc-x86_64-keros-toolchain-klkgw-5.10.1.sh md5:
d62f2552771d7b3964629480aa885fdf
wiki/firmware/release_5.10.txt · Last modified: 2023/10/13 11:28 by ehe
