Setups
General information
Wirnet™ iBTS information
Wirnet™ iFemtoCell information
Wirnet™ iFemtoCell-evolution information
Wirnet™ iStation information
System management
Network management
LoRa Features
KerOS customization
Support and resources
Sidebar
wiki:firmware:release_5.9
Table of Contents
KerOS firmware v5.9.0 (June 2023)
Changes from v5.7.2
Release corrections
- Fix lora_snmp iptables rules management
New features
- Offer a menu in WebUI to retrieve logs from a gateway
- Display a cellular signal quality indicator in WebUI
- Offer a Router mode : a GW with a cellular backhaul shares its internet connection to other GW connected in ethernet.
- Support of a new WAN modem certified with Softbank in Japan for the iFemto-evo 923
Evolutions
- Monitor “lorad” daemon and trigger a reboot when process is unstable
- Make it possible to set/get a generic operator by SMS
- Delay connection activation attempts in connman
Restrictions
- IPSec is not yet supported
- Some issues with the Wi-Fi interface (instabilities, no fallback…) on Wirnet iFemtoCell
- When upgrading from KerOS firmware 4.x, all trustzone secrets are lost
- When upgrading from KerOS FW 4.3.3, a hardware reset is necessary for FW 5.x burner to correctly detect USB
- Update status for an update from KerOS FW 5.1.x, FW 5.2.x or FW 5.3.x is in error, but the update is working fine
- No more support of GSM dongles (please contact Kerlink if you plan to use one)
- When iZepto-E is powered by a computer, it cannot benefit from the connection of a gateway in router mode
- The activation/deactivation of the GSM from the local web interface takes some time to execute, so previous activation status remains displayed for a while. A page refresh after a delay of 15-20s after the action shows the right status
Firmware
Compatibility
- Compatible with Wirnet™ i-series gateways (Wirnet iBTS, Wirnet iFemtoCell, Wirnet iStation, Wirnet iFemtoCell-evolution, Wirnet iZeptoCell Ethernet, Wirnet iZeptoCell Cellular).
Software
- Compatible with Wirnet™ i-series gateways secured with Kerlink Production fuses or without any fuses flashed.
- Regular update (
keros.ipk) is incompatible with firmware older than v5.x
- To upgrade the system from KerOS version 4.3.3 to KerOS version 5.x the use of a liveburner is MANDATORY. Two possibilities are available:
- Upgrade with a custom liveburner. It allows to keep some elements like gateway configuration. To use a custom liveburner, please refer to the dedicated page: Major version upgrade with a custom liveburner.
- Upgrade with a regular liveburner (erasing the whole partition to reinstall the firmware)
Delivery
The firmware is released in two formats: KerOS and Liveburner.
KerOS : Update the Firmware
To update the firmware from v5.x, the regular update procedure can be used.
See system upgrade page.
Liveburner : Reset the Firmware of the product
- Update stock version with FW 5.9.0.
- Reset the default password on your gateway.
- Erase the whole partition to reinstall the firmware.
Download
- KerOS IPK 5.9.0:keros_5.9.0_klkgw-signed.ipk md5:
444be0e048064f9664207f4b97338447 - Liveburner IPK 5.9.0: liveburner_5.9.0_klkgw-signed.ipk md5:
56378b1e7e926f6ed1a778971af750ac - Liveburner IPK 4.3.3-2: liveburner_4.3.3-2_klkgw-signed.ipk md5:
12CFEFB8D4630A34AA90C77E6C73A193 - Custom liveburner IPK 5.9.0: custom-liveburner_5.9.0_klkgw-signed.ipk md5:
8ff334b46fa50ad49b408f297ca989ce - Update liveburner package: update_liveburner_package-v5.5.4.tar.gz md5:
b34113c633b829de2422e297ccdb1f53 - 64-bit toolchain: poky-glibc-x86_64-keros-toolchain-klkgw-5.9.0.sh md5:
a709b81eec73ebad5e6436152a8bd758
wiki/firmware/release_5.9.txt · Last modified: 2023/06/08 16:32 by ehe
