Setups
General information
Wirnet™ iBTS information
Wirnet™ iFemtoCell information
Wirnet™ iFemtoCell-evolution information
Wirnet™ iStation information
System management
Network management
LoRa Features
KerOS customization
Support and resources
Sidebar
wiki:release_4.0.2
This is an old revision of the document!
Table of Contents
Wirnet iBTS firmware 4.0.2 (October 2018)
Changes from 3.4.5
New features
- Writable File system.
- Add web interface.
- Add SMS management.
- Add KerOS REST API access.
- New backup management system.
- New package management system.
Evolutions
- Kernel updated to 4.14.9.
- Global package update.
- Discovery performance and stability improved.
Restrictions
- Configuration
- The result return for the field
rpmb_statusin file/tmp/boar_info.jsonis not correct. This field must not be taken into account in firmware version 4.X. - BNM frequency configuration files depending on the board (bnm-868.conf, bnm-923.conf, bnm-915.conf) are not kept by default when upgrading the gateway.
- Security
- Provenrun rpmb-status is not working on kernel 4.14.
- SMS Feature
- SMS command remove operator doesn't receive response when it's OK.
- SMS manager command doesn't work on sierra_0 on Dual WAN iBTS.
- System
- Possible kernel errors when using fixnetwork.
- Hw reset failed on extusb with fixnetwork.
- Update
- Update status is in error for all package if only one package is wrong.
- Web Interface
- System manager error in the administration menu when using a static IP and a GSM connection.
- After a time modification, sometimes the board does not reboot after pressing the reboot button.
- When editing a GSM operator that is not used returns en error.
- Sometimes GSM status stays green although the GSM is disconnected.
Firmware
Compatibility
Hardware
- Fully compatible with Wirnet iBTS ATc03 architecture and above.
- Partially compatible with Wirnet iBTS ATa01 and ATb02 architecture (issue with reset Button).
Software
- Compatible with Wirnet iBTS products with Kerlink Production fuses or without any fuses flashed.
- Simple update (
keros.ipk) incompatible with 1.x or 2.x firmware → Use of liveburner packages is MANDATORY - ProvenCore firmware and utilities (uploader) changed as of v3.1.0, and files to be uploaded to the ProvenCore have to be processed by
pnrcipherbefore uploading.
Delivery
The firmware is released in two formats: KerOS: and Liveburner.
These have a very different behavior, so please use the appropriate file before updating. See system upgrade page.
Download
- Liveburner IPK: liveburner_4.0.2_klk-lpbs-signed.ipk md5:
291d0fea051ba6cbe53e5c5c00307c0f
wiki/release_4.0.2.1544524088.txt.gz · Last modified: 2019/01/17 10:01 (external edit)
