Setups
General information
Wirnet™ iBTS information
Wirnet™ iFemtoCell information
Wirnet™ iFemtoCell-evolution information
Wirnet™ iStation information
System management
Network management
LoRa Features
KerOS customization
Support and resources
Sidebar
wiki:ressources
This is an old revision of the document!
Table of Contents
Documentations
Software
Hardware
- Wirnet iBTS Installation and maintenance v0.7:
Tools
Toolchain
Firmware 2.x
- 32-bits toolchain :
poky-glibc-i686-keros-cortexa9hf-neon-toolchain-2.1_keros-2.0.0.tar.gz (md5sum)
- 64-bits Toolchain :
poky-glibc-x86_64-keros-cortexa9hf-neon-toolchain-2.1_keros-2.0.0.tar.gz (md5sum)
Sources
Semtech HAL v2 (Loraloc)
Version v3.3.0
HAL v3.3.0 source code and tools are compatible only with FPGA firmware v46.
To know your FPGA software version consult the FAQ How to read FPGA version ?
To know your FPGA software version consult the FAQ How to read FPGA version ?
Version v3.5.0
HAL v3.5.0 source code and tools are compatible only with FPGA firmware v48 and software v2.0.4.
To know your FPGA software version consult the FAQ How to read FPGA version ?
To upgrade your fpga version use the FPGA updater package below fpga_updater.
To know your FPGA software version consult the FAQ How to read FPGA version ?
To upgrade your fpga version use the FPGA updater package below fpga_updater.
HAL library and tools can be freely compiled from delivered tarball. A script is provided in sources to build automatically an IPK package including all tools. This script is named “./build_package.sh”. For more information read the dedicated page: LoRaLoc modem
Restriction:
- loraloc-tools binary test_sx1301ar_pps does not work
- When installing the ipk package including all tools the fpga_updater is not deployed. It is mandatory to upgrade the FPGA firmware before using the HAL v3.5.0 tools.
Semtech Packet forwarder v2 (Loraloc)
Version v3.2.0
Packet forwarder v3.2.0 is compatible only with FPGA firmware v46 and Semtech HAL v3.3.0.
To know your FPGA software version consult the FAQ How to read FPGA version ?
To know your FPGA software version consult the FAQ How to read FPGA version ?
Pre-compiled .ipk
FPGA Updater
FPGA updater package is designed to update all loraloc connected modules FPGA’s firmwares at a same time.
After installation, the boot will be “locked” during approximately between 15 and 30 minutes in order to upgrade FPGA(s) firmware(s) (belonging number of modems connected).
Version v48 (compatible only with HAL v3.5.0)
Semtech Packet forwarder v2 (Loraloc)
Version v3.2.0
Packet forwarder v3.2.0 is compatible only with FPGA firmware v46 and Semtech HAL v3.3.0.
To know your FPGA software version consult the FAQ How to read FPGA version ?.
To know your FPGA software version consult the FAQ How to read FPGA version ?.
wiki/ressources.1485408030.txt.gz · Last modified: 2019/01/17 10:01 (external edit)
