Setups
General information
Wirnet™ iBTS information
Wirnet™ iFemtoCell information
Wirnet™ iFemtoCell-evolution information
Wirnet™ iStation information
System management
Network management
LoRa Features
KerOS customization
Support and resources
Sidebar
wiki:systeme_mana:webui:zcel
Table of Contents
iZeptoCell Cellular - Web interface
Connect to the web interface
The easiest way to connect to your gateway is to address it by name. Wirnet gateways are named after their serial number, as described below, with XXXXXX replaced by the six hexadecimal digits from the serial number; these digits are taken from the last six hexadecimal digits of “EUI” for iZeptoCell Cellular.
http://klk-zcel-XXXXXX/: For example for the iZeptoCell Cellular with 7076FF0080030025 as EUI, the hostname will be: klk-zcel-030025.
It is also possible to enter the IP address of your gateway into your browser’s URL bar (Make sure your computer is on the same local network): http://192.168.120.1/
The default credentials are:
Login:admin
Password:pwd4admin
The web interface allows to:
- Trigger upgrade/update on the gateway.
- Manage the network connectivity (not recommended).
- Trigger actions on the gateway: Turn off, reboot, factory reset.
When changing the IP of the gateway, or when switching from DHCP to fix IP and vice versa, connection to the web interface will be lost. This is not a bug. As the IP changed, the IP used in the browser’s URL bar is no longer up-to-date. Update it to recover the web interface
Overview menu
The overview menu provides the network connectivity status as well as the firmware version, the hardware serial number, and the system status.
| Wirnet iZeptoCell Cellular Web_UI |
 |
Administration menu
Network configuration
The network can be easily configured thanks to the web interface.
After cellular configuration has been set, a reboot of the gateway is required to take into account the new APN configuration.
GSM
The GSM access can be configured in the web interface.
Any specific operator can be configured.
APN is configured by default and no needs to be changed :
• For IZEPTO deployed in North America (915 MHz): APN is equal to
• For IZEPTO deployed in Europe (868 MHz): APN is equal to
• For IZEPTO deployed in North America (915 MHz): APN is equal to
america.bics• For IZEPTO deployed in Europe (868 MHz): APN is equal to
bicsapn
Update
Drag & drop your ipk file and click on UPDATE GATEWAY.
A reboot is required to finalize the update, click on REBOOT GATEWAY.
Gateway administration menu
Get logs from gateway
Logs can be retrieved from the web interface
- Click on START LOG COLLECTION button to create the log archive
- Once created, the button GET LOG FILE turns active. Click on it to download the log archive
The logs archive is downloaded on your computer and then deleted from the gateway.
Other administration possibility
Some other actions can be triggered from the Gateway tab:
- Web interface password change.
- Time settings change.
- Gateway shutdown (halt command).
- Gateway reboot.
- Gateway factory reset (a gateway reboot is required to initiate the factory reset).
wiki/systeme_mana/webui/zcel.txt · Last modified: 2023/06/02 10:41 by ehe
